PVC pipe fitting mold PPR pipe fitting mold PPB pipe fitting mold PPH pipe fitting mold PE pipe fitting mold thin wall mold ball valve mold plastic bucket mold plastic crate mold plastic mold

PE pipe fitting mold

PE pipe resin is polymerized from monogenic ethylene. It has the characteristics of lightweight, corrosion resistance, non-toxicity, easy bending and convenient construction. PE pipe fitting mold typically operate at temperatures between 150 centigrade and 200 centigrade. PE pipe fitting mold typically have a hardness of less than 50-60 HRC, and the heat-treated mold should have sufficient surface hardness to ensure that the mold is sufficiently rigid. The wear resistance of the mold depends on the chemical composition of the steel and the heat treatment hardness, so increasing the hardness of the mold is beneficial to improve its wear resistance. Guarantee the life of the mold and shape accuracy and dimensional accuracy of the PE pipe.

As a pipe fitting mold manufacturer in China, Yuanrun Mould have focused on the PE pipe fitting mold, and offer the whole PE pipe fitting molding line.

PE socket pipe fitting mold

PE socket pipe fitting mold

PE 90 degree elbow mold

PE 90 degree elbow mold

PE tee pipe fitting mold

PE tee pipe fitting mold

China PE 90 degreee elbow pipe fitting mold

China PE 90 degreee elbow pipe fitting mold

<< 1 >>
COMPANY PROFILE PIPE FITTING MOLD CAPABLITY NEWS CENTER CONTACT US

Tel:0086-576-84279678
Fax:0086-576-84279668
E-mai:yrmould@163.com
Add:No.21 Longpulu, Huangyan East Development Zone, Taizhou City, Zhejiang, China


https://www.pipemold.com
Copyright © 2020 Yuanrun Mould | Pipe Fitting Mold 浙ICP备2020045131号 Sitemap